Silicone Accessory

  Clone Powder 

First Part:  --To make the Hands molds by Clone Powder: ( This is the Clone Powder which we talked)

Powder 100g: 350-400ml of water. It is best to apply hand cream before putting the clone powder into your hands, and try not to let your hands get too dry.

1. Manual mixing time: 1 minute, 30 seconds, let it stand for 60 seconds, let the clone powder expel air, let it stand for 60 seconds, then put your hand into the clone powder, adjust the position, and wait for about 5 minutes. During this period, do not shake your hand

2. Machine mixing time: 1 minute, let it stand for 80 seconds, let the clone powder exhaust air, let it stand for 80 seconds, then put your hand into the clone powder, adjust the position, and wait for about 5 minutes. During this period, do not shake your hand

3. Wait for 5 minutes and press the clone powder with the other hand. If you press it down, the hardness of the clone powder will not break, so you can slowly pull out your hand

The Second Parts:---To make Gypsum Hands products:

( This is Gypsum Powder, only for your reference,  just skip it)

Gypsum Powder 100g:   Water 35ml

Manually stir for 1 minute and 30 seconds, pour into the mold, control the pouring time to 4 minutes and 30 seconds, and let it stand for 30 minutes. After heating is completed, remove it